Labelling A Cd; Disc Memo - Sony MDX-C7970 Manual De Instrucciones

Labelling a CD

(For a CD unit with the custom file function)
You can label each disc with a personalized
name. You can enter up to eight characters for
a disc. If you label a CD, you can locate the
disc by name and select the specific tracks for
playback (page 20).
1
Play the CD and press (LIST) for two
seconds.
2
Enter the characters.
1 Rotate the dial clockwise to select the
desired characters.
(A n B n C n ··· Z n 0 n 1 n 2 n
··· 9 n + n – n * n / n \ n > n <
n . n _ )
If you rotate the dial counterclockwise,
the characters will appear in reverse
order.
If you want to put a blank space
between characters, select "_" (under-
bar).
2 Press (5) (n) after locating the
desired character.
The flashing cursor moves to the next
space.
If you press (2) (N), the flashing cursor
moves to the left.
3 Repeat steps 1 and 2 to enter the
entire name.
3
To return to normal CD playback mode,
press (LIST) for two seconds.
Tip
To erase or correct a name, enter "_" (under-bar)
for each character.

— Disc Memo

Displaying the disc memo
Press (DSPL) during CD or CD TEXT disc
playback.
Each time you press (DSPL) during CD or
CD TEXT disc playback, the item changes
as follows:
Track number/
Elapsed playback time
Disc memo name
Track name*
Clock
* If you connect an optional CD unit with the
CD TEXT function, the CD TEXT information
will appear in the display when you play a
CD TEXT disc.
Erasing the disc memo
1
Press (SOURCE) repeatedly to select CD.
2
Press (MODE) repeatedly to select the CD
unit.
3
Press (LIST) for two seconds.
4
Press (DSPL) for two seconds.
5
Rotate the dial to select the name you
want to erase.
6
Press (6) (ENTER) for two seconds.
The name is erased.
Repeat steps 5 and 6 if you want to erase
other names.
7
Press (LIST) for two seconds.
The unit returns to normal CD playback
mode.
Note
When a personalized label is erased, the original
CD TEXT information will appear in the display.
$
$
$
$
19