Key To Symbols; Symbols On The Machine; Symbols In The Operator's Manual - Husqvarna DS 150 Manual De Instrucciones

Ocultar thumbs Ver también para DS 150:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Symbols on the machine:

WARNING! The machine can be a
dangerous tool if used incorrectly or
carelessly, which can cause serious or fatal
injury to the operator or others.
Please read the operator's manual carefully
and make sure you understand the
instructions before using the machine.
Always wear:
Approved protective helmet
Approved hearing protection
Protective goggles or a visor
Breathing mask
Ensure that water cannot leak into the
machine when drilling in the ceiling.
Use an appropriate water collector
and cover the machine in plastic, but
do not cover the air intakes and air
outlets.
Other symbols/decals on the machine refer to special
certification requirements for certain markets.
2 –
English

KEY TO SYMBOLS

Symbols in the operator's manual:

Inspection and/or maintenance should
be carried out with the motor switched
off and the plug disconnected.
Always wear approved protective
gloves.
Regular cleaning is required.
Visual check.
Protective goggles or a visor must be
worn.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Ds 250

Tabla de contenido