Key To Symbols; Symbols On The Machine; Machine Marking Plate; Explanation Of Warning Levels - Husqvarna WSC 40 Manual De Instrucciones

Symbols on the mac hine:
W ARNING! The machine can be a
dangerous tool if used incorrectly or
carelessly, which can cause serious
or fatal injury to the operator or
others.
Please read the operator's manual
carefully and make sure you
understand the instructions before
using the machine.
Always wear:
• Approved protective helmet
• Approved hearing protection
• Protective goggles or a visor
• Breathing mask
Risk of cutting. Keep all parts of your
body away from the cutting equipment.
Flying object hazard. The operator
must always stand at an angle
diagonally behind an operating saw, to
prevent the risk of being struck by
objects from the material.
Keep a safe distance from the
machine. For the operator the
minimum safety margin to moving
parts during operation is 4 meters
(13 ft).
This product is in accordance with
applicable EC directives.
2 – English
KEY T O SYMBOLS
Mac hine marking plate
Ro w 1: Brand
Row 2: Manufacturer's address
Row 3: Type
Row 4: Serial number (year, week, number)
Row 5: Max speed
Row 6: Max power, certification symbols applicable to
certain markets.
Explanation of warning le vels
The w arnings are graded in three levels.
W ARNING!
4m
IMPORTANT!
CAUTION!
CA UTION! Used if there is a risk of damage to materials
or the machine if the instructions in the manual are not
followed.
Other symbols/decals on the mac hine refer to special
certification requirements for certain markets.
Husqvarna AB, Huskvarna Sweden
TYPE
XX X XX
SERIAL No.
XX XX XX
(YEAR WEEK No.)
MAX
XX m/s (XXXX rpm)
SPEED
Max
Power: X kW
W ARNING! Used if there is a risk of
!
serious injury or death for the operator
or damage to the surroundings if the
instructions in the manual are not
followed.
IMPOR TANT! Used if there is a risk of
!
injury to the operator or damage to the
surroundings if the instructions in the
manual are not followed.