Using Your Appliance; Filling The Water Tank - Bosch Sensixx’x DA70 EasyComfort Instrucciones De Uso

Using your appliance

45º
16
B O SC H

1. Filling the water tank

This appliance has been designed to use normal tap water.
Important: Do not use additives! The addition of other
liquids, such as perfume, vinegar, starch, condensation
water from tumble dryers or from air conditioning systems
or chemicals will damage the appliance. Any damage
caused by the use of the aforementioned products will
make the guarantee void!
1 Unplug the iron from the mains.
2 Set the steam regulator (5) to the position
3 Open the water inlet lid (6).
4 Fill the water tank. Never fill beyond the level mark
for maximum filling (8)!
5 Close the water inlet lid.
Tip: To prolong the optimum steam function, you may mix
tap water with distilled water 1:1. If the tap water in your
district is very hard, mix tap water with distilled water 1:2.
ºC
2. Heating
Remove any labels or protective covering from the
soleplate (10).
1 Plug in the iron.
2 "SensorSecure" function will be activated and the
indicator lamp (2) will flash.
3 The "TempOK" indicator lamp (1) will flash, indicating
that the iron is heating up. When the iron is ready to
use, the indicator lamp will remain lit continuously.
.