Using your appliance
45º
16
B O SC H
1. Filling the water tank
This appliance has been designed to use normal tap water.
Important: Do not use additives! The addition of other liquids,
such as perfume, vinegar, starch, condensation water from
tumble dryers or from air conditioning systems or chemicals
will damage the appliance. Any damage caused by the use of
the aforementioned products will make the guarantee void!
1
Unplug the iron from the mains.
2
Open the water inlet lid (7).
3
Fill the water tank. Never fill beyond the level mark for
maximum filling (9)!
4
Close the water inlet lid.
Tip: To prolong the optimum steam function, you may mix
tap water with distilled water 1:1. If the tap water in your
district is very hard, mix tap water with distilled water 1:2.
ºC
2. Heating
Remove any labels or protective covering from the
soleplate (10).
1
Plug in the iron.
2
"SensorSteam" function will be activated and the
indicator lamp (2) will flash.
3
The "eco" steam mode is automatically selected.
4
The "TempOK" indicator lamp (12) will flash, indicating
that the iron is heating up. When the iron is ready to use,
the indicator lamp will remain lit continuously.