not use the product on ground
that slopes more than 15°
• Exercise extreme caution
when changing direction on
slopes. Operate the product
across the face of slopes. Do
not move up and down.
• Be careful when you go near
hidden corners and objects
that prevent a clear view.
Work safety
WARNING: Read the
warning instructions that
follow before you use the
product.
• Use this product to cut grass
lawns only. It is not permitted
to use it for other tasks.
• Use personal protective
equipment. Refer to
protective equipment on page
12 .
• Make sure that you know how
to stop the motor quickly in an
emergency.
• Do not operate the product in
rain or wet conditions. The risk
of electrical shock increases if
water enters the product.
• Do not operate the product
unless the blade and all
covers are attached correctly.
An incorrectly attached blade
1199 - 003 - 28.04.2020
• Make sure that the blade does
• If the blade hits an object or if
• Never attach the motor brake
Personal
• Put the product on a stable,
• Always stay behind the
• Let all the wheels stay on the
can come loose and cause
personal injury.
not hit objects such as stones
and roots. This can do
damage to the blade and bend
the motor shaft. A bent axle
causes heavy vibration and a
very high risk that the blade
becomes loose.
vibrations occur, stop the
product immediately. Stop the
motor, turn the safety key to 0
and remove the battery.
Examine the product for
damages. Repair damages or
let an authorised service agent
do the repair.
handle permanently to the
handle when the motor is
started.
flat surface and start it. Make
sure that the blade does not
hit the ground or other objects.
product when you operate it.
ground and keep 2 hands on
the handle when you operate
the product. Keep your hands
and feet away from the
rotating blades.
11