HOLZMANN MASCHINEN HMS 700 Instrucciones De Servicio página 22

To avoid malfunction, machine defects and injuries, read the following security instructions!
In the following machine this guards are in effect:
 Keep your work area dry and tidy! An untidy work area may cause accidents. Avoid
slippery floor.
 Make sure the work area is lighted sufficiently
 Do not overload the machine
 Avoid abnormal working postures! Make sure you stand squarely and keep balance at all
times.
 Keep away from the running grinding wheel!
 Always stay focused when working. Reduce distortion sources in your working
environment. The operation of the machine when being tired, as well as under the
influence of alcohol, drugs or concentration influencing medicaments is forbidden.
 Do not climb onto the machine!
 Attach the machine to the underground
 Respectively trained people only and only one person shall operate the machine.
 Do not allow other people, particularly children, to touch the machine or the cable. Keep
them away from your work area.
 Make your workshop childproof.
 Make sure there is nobody present in the dangerous area. The minimum safety distance is
2m
 Wear suitable work clothes! Do not wear loose clothing or jewelry as they might be caught
and cause severe accidents!
 Wear a hair net if you have long hair.
 Loose objects can become entangled and cause serious injuries!
 Use personal safety equipment: ear protectors, safety goggles, safety gloves and working
clothes when working with the machine.
 Never leave the machine running unattended! Before leaving the working area switch the
machine off and wait until the machine stops.
 Always disconnect the machine prior to any actions performed at the machine.
 Avoid unintentional starting
 Do not use the machine with damaged switch
 The plug of an electrical tool must strictly correspond to the socket. Do not use any adapters
together with earthed electric tools
 Each time you work with an electrically operated machine, caution is advised! There is a
risk of electric shock, fire, cutting injury;
 Use power tools and machines never in the vicinity of flammable liquids and gases (danger
of explosion)
 Check the cable regularly for damage
 Protect the cable from heat, oil and sharp edges
 Avoid body contact with earthed
 Before starting the machine remove any adjusting wrenches and screwdrivers
 Use a clip or clamping jaws to secure the workpiece
Severe injuries to your hands from sharp blades are possible.

A first aid kit should always be readily available for a possible accident.
Initiate the violation in accordance with the necessary first aid measures.
When requesting support, provide the following details:
1. Place of accident
3. Number of injured people
HOLZMANN MASCHINEN GmbH
 Emergency button on the control panel
Emergency procedure
www.holzmann-maschinen.at
NOTICE
NOTICE
2. Type of accident
4. Injury type(s)
SAFETY
22
HMS 700 / HMS 1000