Preperation Of The Surface; Install Motors - HOLZMANN MASCHINEN HMS 700 Instrucciones De Servicio

13.1.4 Preperation of the surface

Uncoated metal machine parts have been insulated with a greasy layer to inhibit corrosion.
This layer has to be removed. You can use standard solvents that do not damage the machine surface.
Do not use solvents based on nitrite, aggressive solvents like break cleaners or
scrubbing agents! These damage the machine surface.
13.2

Install motors

1. Mainmotor:
Mount with 4 screws
3. Controlpanel:
4. Cable clamp:
Fix the control line with the
cable clamp.
Replace and fix the control
panel cover!
HOLZMANN MASCHINEN GmbH
Remove the controlpanelcover and fix the controlpanel with
the 3 screws. Pay attention to the sensor cables!
Place the handwheel and fix with the nut.
www.holzmann-maschinen.at
N O T I C E
2. Travelmotor
Mount with 4 screws
5. Handwheel:
ASSEMBLY
24
HMS 700 / HMS 1000