Belkin F5D7010 Manual Del Usuario página 33

Troubleshooting
Card does not perform or connection is unstable when computer has
a second built-in wireless network card (such as a mini PCI or Intel
Centrino ).
™
This condition occurs if your computer has a built-in wireless
card while your Belkin Wireless Card is also active. This
happens because Windows must now handle two active wireless
connections.
You need to disable the built-in wireless card from your computer
under "Network Adapters" in the Device Manager.
Card does not perform or connection is slow when computer has a
built-in wired Ethernet card.
This condition occurs if your computer has an active Ethernet
card while your Wireless Card is also active. This happens
because Windows must now handle two active network
connections. You need to disable the Ethernet card from your
computer under "Network Adapters" in the Device Manager.
What's the difference between 802.11b, 802.11g, 802.11a, and Pre-N?
Currently there are four levels of wireless networking standards,
which transmit data at very different maximum speeds. Each
is based on the designation for certifying network standards.
The most common wireless networking standard, 802.11b,
transmits information at 11Mbps; 802.11a and 802.11g work at
54Mbps; and Pre-N works at 108Mbps. Pre-N, the precursor to
the upcoming 802.11n release, promises speeds that exceed
802.11g, and up to twice the wireless coverage area. See the
chart on the next page for more detailed information.
31 31
1
®
2
3
4
5
6