Orima OR-646-VIT Manual De Instrucciones página 34

1. You operate the hob with the ring switches on the control panel of
oven. This switch regulates the energy in order to reach desired
temperature set by you.
2. In order to have a good cooking result from the hob, the pans bottom
should be as thick and lat as possible.
3. Bottom of pans and cooking zones should be the same size. If possible,
always place lids on the pans. Always place cookware on the cooking zone
before it is switched on. Switch cooking zones off before the end of the
cooking time, to take advantage of residual heat.
4. Turn the knob to clockwise for starting to operate. Temperature set up
by the knob position on the line gradually increasing up to max.
(Single zone)
5. For dual cooking zone the irst ring operating like single zone; second
ring starts to operate after extra turning by some more force to clock wise
on the "max" region end of the ring sign. When you turn to counter clock
wise, the irst ring will operate as maximum range and the second ring's
power will reduce up to you desire temperature.
Ø140mm
Ø180mm
Ø180mm
Ø140mm
Restvarmeindikator
GB
Ø140mm
Ø140X250mm
Ø140mm
Ø120/180mm
Restvarmeindikator
Ø140mm
Ø180mm
Ø140mm
Ø180mm
34
Ø140mm
Ø180mm Ø140mm
Restvarmeindikator