Changing The Oven Lamp - Orima OR-646-VIT Manual De Instrucciones

CHANGING THE OVEN LAMP

In order to avoid the possibility of an electric shock, ensure that the
circuit of the appliance is open before changing the lamp.
(The open circuit is an electrical circuit that does not conduct current)
1. First of all, cut the electrical connection of the appliance and ensure
that the appliance is cooled down.
2. Remove the glass protection by turning as shown in the igure. If
you have dificulty in turning it, the use of plastic gloves will help you.
3. Afterwards, remove the lamp by turning and install the new lamp
with the same speciications. The speciications of the lamp should be
as follows:
-230 V AC,
-15 W,
-Type E14
4. Place the glass protection and comlete the replacing process by
plugging in the electric cable of the appliance. Now, you can use your
oven.
Figure 6
GB
37
Figure 7