Inserting And Replacing Batteries - HoMedics Deluxe One-Second Manual Del Usuario

INSERTING AND REPLACING BATTERIES

1. Remove clear sticker protecting display.
2. Carefully remove the battery cradle as shown in
Figure 3.
3. Carefully remove the battery by sliding it out of the
cradle as shown in Figure 4. Do not use metal
tweezers or a screwdriver to remove the battery.
4. Insert one CR-2032 (3.0 V dc) battery with the plus
symbol (+) up.
5. Replace the battery cradle.
Figure 3
Figure 4
8
Note that the thermometer will display a default
temperature of 00 after battery power is restored and until
a measurement is taken.
When the low battery symbol appears on the display, the
battery should be replaced. When the low battery symbol
appears with the "Lo" symbol (Figure 5), the battery must
be replaced in order for the ear thermometer to function.
Figure 5
NOTE: Do not discard used lithium batteries in trash.
Please turn in at an official collection point. If the monitor
will not be used for an extended period of time (three
months or more), please remove battery to prevent
damage to the thermometer from possible battery
leakage.
Low battery
warning
9