Controls; Remote Control - GE AEL05 Manual Del Propietario Y Instrucciones De Instalación

About the controls on the air conditioner.
Features and appearance will vary.
Lights next to the touch pads on the air conditioner control panel indicate the selected settings.
Dght indicates the unit
is in the temperature or
delay time Set mode.
Auto
m High _ Cool
m Med _ Energg Sorer
Low _ Fan Onlg
(on some models)
Light indicates the
delay timer is set.
NOTE: The display always shows the
room temperature except when setting
the Set temperature or the Delay timer.
Light indicates the unit
is in the temperature or
delay time Set mode.
m Auto
m High m
Cool
m Med _ _nergy Savel
m LOW _ Fan Ontg
TemplDelag
cT? c ,?
Dght indicates the [
delay timer is set. (on some models)
0
0
Delay 1-24hr
Delay timer __
Decrease
Mode select
Fan speed
Decrease
Temperature O--
set Increase
ond
Decrease
Air Conditioner Controls
Controls (onsome models)
O ower Pad
Turns air conditioner on and off. When turned
on, the display will show the room temperature.
O Display
Shows the room temperature or time remaining
on the Delay timer. Shows the Settemperature
while setting the temperature in Cool or Energy
Saver modes.The Set light will turn on while
setting.
O
O
NOTE: T he display will change to show the room
temperature after settings have been made.
O emp Increase A/Decrease T Pads
Useto set temperature when in Cool or Energy
Saver mode. The Set light will turn on while
setting.
O elay Timer Increase A (+)/Decrease T(-)
Pads
Eachtouch of the Increase A/Decrease T
pads on the unit or the Increase + / Decrease
- pads on the remote control will set the delay
time when using the Delay 1-24hr timer. The
Set light will turn on while setting.
O an Speed Pads
Useto set the fan speed to Low, Meal,High
or Auto on the unit. NOTE:On the remote
control, use the fan speed Increase + /
Decrease - pads to set the fan speeds to Low,
Mad or High. Use the Auto pad to turn Auto
fan on.
Delay timer
Increase
Auto Fan on
Fan speed
Increase
Unit power
on/off
Remote Control
Mode Pad
Useto set the air conditioner to Cool, Energy
Saver or Fan Only mode.
Delay Pads
Delay ON-When the air conditioner is off, it can
be set to automatically come on in i to 24 hours
at its previous mode and fan settings.
Delay OFF--When the air conditioner ison,
it can be set to automatically turn off in i to
24 hours.
How to set:
Pressthe Delay 1-24hr pad on the unit or on the
remote control. Eachtouch of the Increase A
/Decrease _'pads on the unit or the Increase
+/Decrease - pads on the remote control will
set the timer in 1-hour intervals. The Set light will
turn on while setting.
To review the remaining time on the Delay
1-24hr timer, press the Delay 1-24hr pad on the
unit or on the remote control. Usethe Increase
A/ Decrease T
pads on the unit or the
Increase +/Decrease - pads on the remote
control to set a new time if desired.
To cancel the timer, press the Delay 1-24hr pad
until the light on the Delay 1-24hr pad goes off.
4
Note: The default temperature reading on the display is degree Fahrenheit (°F). To change the display to
degree Celcius (°C),press the Temp Increase A and Temp Decrease T buttons together and hold for 3
seconds. Repeat the process to change back to degree Fahrenheit (°F)