Steren TEMP­24H/MIN Manual De Instrucciones página 2

24 HOUR TIMER
INSTRUCTION MANUAL
V0.0
Read this manual carefully to avoid any malfunction.
The information shown in this manual serves only as a reference for the product. Because
Updates may exist differences.
Please check our website www.steren.com for the most recent version of this manual.
CAUTIONS
• This device is not intended for use by people (including children), whose physical, sensory or mental abilities are different
or reduced, or who lack experience or knowledge.
• Children should be supervised to ensure they do not use the device as a toy.
• Always use a soft, clean and dry cloth to clean the equipment.
• Do not attempt to open the equipment, it may cause malfunction and void the warranty.
• Do not use or store this equipment in places where there are leaks or splashes of water.
• The equipment system is electromechanical; There may be time lags in the programming time.
PARTS
HOW TO USE
To set the current time, turn the selection knob
1
clockwise.
The triangle should indicate the number that
corresponds to the current time.
The format is 24 h.
2
Slide the mode switch to the timer position (
If you do not use the timer mode, you can slide the switch
to permanent ( ) to work as a normal contact.
Lower or lift the programming tabs to choose the automatic on or off time. It is recommended that you use a
3
pointed object.
Each tab
corresponds to a
lapse of 30 minutes.
Connect the timer to an electrical outlet and on the timer connect the equipment whose ignition you want to
4
automate.
SPECIFICA TIONS
Input: 120 V~ 60 Hz 15 A max.
Output: 120 V~ 60 Hz 15 A max.
Operating temperature: 0 °C to 40 °C
Resistive load: 1 760 W máx.
TEMP­24H/MINI
Programming tabs
Selection knob
of current time
Contact
this important that you first set the current time to
use the timer mode.
).
EXAMPLES:
If you want the device connected to the timer to
remain on for only a certain period of time, for
example, from 7 a.m. to 11 p.m., press from tab 19
to 23.
If you want the appliance to remain on all day and
turn off at certain times, first lower all the tabs and
then lift only those that correspond to the desired
hours, for example, to turn off at 3 and 5 in the
afternoon, lift the tabs 15 and 17.
Product design and specifications may change without prior
notice.
0618A
Mode switch:
permanent ignition or
programmed (timer)
Plug
Ex: if your watch is 4 o'clock
in the afternoon, place the
knob on the number 16.