Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
SG Series Rebuild Kits
Instructions
Regulator Preparation:
1.
Back off handknob completely to shut-off position.
2.
Vent all pressure: P1=0, P2=0.
3.
Remove regulator from service and place in vice using flat on regulator body.
4.
Remove bonnet with adjustable wrench. Or 60 mm for SG3XXXXX or 42 mm for
SG1XXXXX and SG2XXXXX.
4
English
Diaphragm
Diaphragm
Washer
Getting Started
Publicidad
Tabla de contenido
