Disc Playback - Denver DVD-228 Instrucciones De Operación

1. Press the POWER button displayed on the front panel.
2. Press the OPEN/CLOSE button.
This will open the disc tray, and place a playable disc on it.
3. Press ENTER/
After closing the disc tray playback will start.
As the DVD video player is reading the disc, a menu will appear on screen or you may access the menu by
pressing the TITLE button.
4. Select a title/chapter or track.
Press and
You also can press
5. Stop playback
Press the STOP button once, the player is stopped. You can press the RESUME button to replay from the
point stopped (except MP3).
Press the STOP button twice, the player is stopped. Press the ENTER/
!
• Moving the DVD video player during playback may cause damage to the disc as well as the player.
• To open and close the disc tray, you may only use the OPEN/CLOSE button on the remote control or DVD video player.
• If the picture on TV screen kept rolling, press the P/N key on the remote to choose an appropriate mode.

Disc Playback

during playback to move between tracks.
or the number buttons to select the title/chapter or track.
8
With the playback side
to playback from the start.
down.