Akasa integral Manual De Usuario página 13

for Windows
:
NOTE If the new drive fails to appear in My Computer, it means that the HDD has not been
partitioned, please refer to "Partition the External Hard Disk" chapter to prepare your USB2.0 Hard
Disk.
24
USB Connection
6.
After the necessary files are copied into your
system, click on [Finish].
7.
[My Computer], a new drive
Double click on
letter is added; this is the INTEGRAL drive
which is now installed.
8.
A green Unplug arrow icon or Eject hardware
icon will appear in system tray.
for Windows
Disconnecting the INTEGRAL LAN
WARNING!!
Do not unplug the USB2.0 cable nor the power cable from the Integral Drive unit or breaking the communications
with the USB HUB while copying files to or from the device or when files or applications stored on the USB2.0 External
Drive are being accessed. DOING THIS MAY RESULT IN LOSS OF DATA!
Windows XP/Me/2000
1.
Double-click on the [Unplug arrow icon or Eject
Hardware] icon in the system tray. Dialog box
appears as on the right.
2.
Highlight the [USB Mass Storage Device]
dialog box, click on [Stop], choose the USB2.0
External Drive that you want to disconnect, then
click on [Stop] again on next screen.
.
Wait for few seconds, the system prompts
may safely remove this device". Unplug the USB
cable from the USB port of the computer.
Windows 98SE
1.
Double click the green Unplug or Eject hardware
icon in system tray and select the device that you
want to remove and click on [Safely Remove].
2.
When the system prompts "Confirm device to be
stopped", click on [OK]. When the green Arrow
Icon has disappeared, unplug the USB cable from
the USB port of the computer.
25
USB Connection
in the
"You