Akasa integral Manual De Usuario página 9

for Windows
NDAS Device Management
NDAS Device Status Modes
NDAS device provides users with six basic Modes. Below is a chart describing each of the
NDAS device modes and the icons that correspond with each mode.
INTEGRAL LAN
Icon Colour
Read-Only Mode
Green
• Users can only read from INTEGRAL
LAN
Read/Write Mode
Blue • Users can read and write to
INTEGRAL LAN
Connected Mode
• INTEGRAL LAN is currently disabled
White
on your computer and is ready to
be mounted (enable)
Disconnected Mode
• INTEGRAL LAN is registered but your system
can not find it.
• Power Cord, Ethernet Cord or USB Cord
Black
maybe unplugged.
• Make sure any Antivirus /Firewall software or
spyware is not interfering with the
connection.
Deactivated Mode
Red • INTEGRAL LAN is registered but no longer
communicates with your system. No attempts
will be made to communicate with device.
Bound Non-Primary Mode
• Used for bound INTEGRAL LAN drives only.
Yellow
• All of the bound INTEGRAL LAND drives are
(Bound) displayed as yellow except the primary
device.
16
Network Connection
Bind
Mode/Meaning
Management
Icon
for Windows
To see an INTEGRAL LAN status click on the NDAS Device Management icon located on the system tray. All
registered NDAS device(s) will be displayed on the NDAS Device Management Menu.
WARNING :
Always unmount the INTEGRAL LAN enclosure on all PC's with access before switching it off. Alternatively you
can shut down all the systems accessing the INTEGRAL LAN before switching it off.
NDAS Device Management Menu
Register a New Device Registers an INTEGRAL LAN to your computer
Refresh Status Updates status of your INTEGRAL LAN
About
Displays NDAS software version information
Options Can customize INTEGRAL LAN management features
and error messages/dialogs
Exit
Exits INTEGRAL LAN Management
Mounted (RW) INTEGRAL LAN mounted with read and write rights
Mounted (RO)
INTEGRAL LAN mounted with read only rights
Unmount Enables users to change INTEGRAL LAN mode
Properties Displays properties of the INTEGRAL LAN
Disconnected
The INTEGRAL LAN is disconnected
Unregister Enables users to un-register INTEGRAL LAN device
Properties
Displays properties of the INTEGRAL LAN
Connected INTEGRAL LAN connected but not mounted
Mount (Read-Only) Mounts the INTEGRAL LAN with read only rights
Mount (Read/Write) Mounts the INTEGRAL LAN with write/read rights
Deactivated There is no communication with INTEGRAL LAN
Activates INTEGRAL LAN into Connected mode
Activate
17
Network Connection