Conceptronic C54APM Manual De Inicio Rápido página 32

ENGLISH
4 In the Network Component Type dialog box, select Protocol and click Add button.
5 In the Select Network Protocol dialog box, select Microsoft a
the OK button to start installing the TCP/IP protocol. You may need
to complete the installation.
6 After installing TCP/IP, go back to the Network dialog bo
or Network Components and then click the Properties button.
7 Check each of the tabs and verify the following settings:
Bindings: Check Client for Microsoft Networks and File and printer sharing for
Microsoft Networks.
Gateway: All fields are blank.
DNS Conf iguration: Select Disable DNS.
WINS Configuration: Select Disable WINS Resolution.
IP Address: Select Specify
as following example.
3 IP Address: 10.0.0.3 (any IP address within 10.0.0.2~10.0.0.254 is
do not use 10.0.0.1)
4 Subnet Mask: 255.0.0.0
8 Reboot the PC. Your
1b) W indows 2000
1 Click the Start button and select Settin
Panel window will appear.
2 Double-click Networ
Connection window, double-click Local Area Connection icon. The L
Connection window will appear.
3 In the Local Area Conne
4 Check your list of Ne
on your list. Select it and click the Properties button.
5 In the Internet Protocol (TCP/IP) Properties window, select Use the following IP
address and specify the IP A
• IP Address: 10.0.0.3 (any IP address within 10.0.0.2~10.0.0.254 is available,
do not use 10.0.0.1)
• Subnet Mask: 255.0.0.0
6 Click OK to confirm the setting. Your PC will now have the IP Address you
specified.
an IP Address. Specify the IP Address and Subnet Mask
PC will now have the IP Address you specified.
gs, then click Control Panel. The Control
k and Dial-up Connections icon. In the Network and Dial-up
ction window, click the Properties button.
twork Components. You should see Internet Protocol [TCP/IP]
ddress and Subnet mask as following.
32
nd TCP/IP and then click
your Windows CD
x. Select TCP/IP from the list
available,
ocal Area