JVC KD-X40 Manual De Instrucciones página 15

Ocultar thumbs Ver también para KD-X40:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Menu item
SUB. W *5
(Subwoofer)
SUB.W LPF *6
(Subwoofer low-
pass filter)
SUB.W LEVEL *6
(Subwoofer level)
HPF *6
(High-pass filter)
BEEP
(Keytouch tone)
TEL MUTING *7
(Telephone
muting)
AMP GAIN *8
(Amplifier gain)
SSM
AREA
(Frequency
tuning interval)
MONO
(Monaural mode)
IF BAND
(Intermediate
frequency band)
RADIO TIMER
IPOD SWITCH
(iPod/iPhone control)
AM *9
F-AUX *9
(Front auxiliary
input)
R-AUX *9
(Rear auxiliary
input)
*5
Displayed only when <L/O MODE> is set to <SUB.W>.
*6
Displayed only when <SUB.W> is set to <ON>.
*7
This setting does not work if <BT ADAPTER> is selected for <R-AUX> of <SRC SELECT>.
*8
The volume level automatically changes to "VOLUME 30" if you change to <LOW POWER>
with the volume level set to higher than "VOLUME 30".
*9
Displayed only when the unit is in any source other than the corresponding source "AM/
F-AUX/R-AUX/BT AUDIO".
Selectable setting (Initial: [XX])
OFF: Cancels.
[ON]: Turns on the subwoofer output.
LOW 55Hz/MID 85Hz/[HIGH 120Hz]: Audio signals with frequencies
lower than 55 Hz/85 Hz/120 Hz are sent to the subwoofer.
00 — 08 [08]: Adjusts the subwoofer output level.
ON: Activates the High Pass Filter. Low frequency signals are cut off from
the front/rear speakers.
[OFF]: Deactivates. (All signals are sent to the front/rear speakers.)
[ON]/OFF: Activates or deactivates the keypress tone.
ON: Mutes the sounds while using the cellular phone (not connected
through KS-BTA100).
[OFF]: Cancels.
LOW POWER: VOLUME 00 — VOLUME 30 (Select if the maximum power of
each speaker is less than 50 W to prevent damaging the speakers.)
[HIGH POWER]: VOLUME 00 — VOLUME 50
For settings,
page 6. (Displayed only when the source is "FM".)
[AREA US]: For North/Central/South America, AM/FM intervals: 10 kHz/200 kHz.
AREA EU: For any other areas, AM/FM intervals: 9 kHz/50 kHz.
AREA SA: For some South American countries, AM/FM intervals: 10 kHz/50 kHz.
Displayed only when the source is "FM".
[OFF]: Enables stereo FM reception.
ON: Improves the FM reception but stereo effect will be lost.
[AUTO]: Increases the tuner selectivity to reduce interference noises
between adjacent stations. (Stereo effect may be lost.)
WIDE: Subject to interference noises from adjacent stations, but sound
quality will not be degraded and the stereo effect will remain.
For settings,
page 6.
[HEAD MODE]/IPOD MODE/EXT MODE:
For settings,
page 8. (Displayed only when the source is "USB-IPOD".)
[ON]/OFF: Enables or disables "AM" in source selection.
[ON]/OFF: Enables or disables "F-AUX" in source selection.
ON/OFF: Enables or disables "R-AUX" in source selection.
[BT ADAPTER]: Select if the rear auxiliary input jack is connected to the
Bluetooth adapter, KS-BTA100 (
changed to "BT AUDIO".
Menu operations
page 10). The source name will be
ENGLISH |
15

Publicidad

Tabla de contenido
loading

Tabla de contenido