Multiplex POWER PEAK QUAD EQ-BID 230V Instrucciones De Uso página 37

Power Peak® Quad EQ-BID 230 V
SELECTING A MEMORY LOCATION
SELECTING THE TYPE OF BATTERY
bol flashes. You can now select a battery type from NiCd, NiMH, LiPo, LiIo, LiFe or Pb
(lead-acid) using the 'INC' or 'DEC' buttons. Press the 'ENTER' button again to confirm
your selection.
screen display until the arrow is next to Cell Count. Press the 'ENTER' button and the '+
/ -' symbol flashes. Now the number of cells can be selected between 1 and 14 cells for
NC and NiMH battery packs using the "INC/DEC" buttons. Press the 'ENTER' button again
to confirm your selection. With the battery types LiPo, LiIo, LiFe and Pb (lead-acid) you
should enter the nominal battery voltage instead of the cell count.
Example: Press the 'INC/ - ' button to leaf through the screen display until the arrow indi-
LiPo
Cell count Battery voltage
1 3,7 Volt
2 7.4 Volt
3 11.1 Volt
4 14,8 Volt
5 18,5 Volt
6 22,2 Volt
Operating Instructions
Press the 'INC' button to leaf through the screen
display until the arrow indicates Memory. Press the
'ENTER' button and the '+ / -' symbol flashes. You
can now select a memory within the range 0 to 9
using the 'INC' or 'DEC' button. Press the 'ENTER'
button again to confirm your selection.
Press the 'INC/ DEC ' button to leaf through the
screen display until the arrow is next to Battery
Type. Press the 'ENTER' button and the '+ / -' sym-
SETTING UP NUMBER OF CELLS/BATTERY
VOLTAGE
Press the 'INC/ DEC ' button to leaf through the
cates Battery Voltage. Press the 'ENTER' button
and the '+ / -' symbol flashes. For a LiPo battery,
the battery voltage can now be selected in 3.7 V per
cell increments. Press the 'ENTER' button again to
confirm your selection.
The following voltages are available to use for lithi-
um batteries:
LiIo
Cell count Battery voltage
1 3,6 Volt
2 7,2 Volt
3 10,8 Volt
4 14,4 Volt
5 18,0 Volt
6 21,6 Volt
13
37
# 30 8196
LiFe
Cell count Battery voltage
1 3,3 Volt
2 6.6 Volt
3 9,9 Volt
4 13,2 Volt
5 16,5 Volt
6 19.8 Volt