Safety Instructions; General Guidelines; User Manual - Perel AOBD2 Manual Del Usuario

Lector de códigos universal obd-ii/eobd y can
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 23
1.
Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could
harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it should
be taken to a specialized company for recycling. This device should be returned to your distributor or to
a local recycling service. Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Perel! Please read the manual thoroughly before bringing this device into service. If the
device was damaged in transit, do not install or use it and contact your dealer.
2.

Safety Instructions

This device can be used by children aged from 8 years and above, and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning the use of the device in a safe way and understand the
hazards involved. Children shall not play with the device. Cleaning and user maintenance shall not
be made by children without supervision.
Do not disassemble or open the cover. There are no user-serviceable parts inside the device.
Refer to an authorized dealer for service and/or spare parts.
Always perform automotive testing in a safe environment. Operate in a well-ventilated work area – exhaust
gases are poisonous!
Wear eye protection. Keep clothing, hair, tools, test equipment, etc. away from all moving or hot engine
parts.
Put blocks on drive wheels and never leave the vehicle unattended while running tests.
Use extreme caution when working around the ignition coil, distributor cap, ignition wires and spark plugs.
These components create hazardous voltages when the engine is running.
Put the transmission in PARK (for automatic transmission) or NEUTRAL (for manual transmission). Make
sure the parking brake is engaged.
Keep a fire extinguisher suitable for gasoline/chemical/electrical fires nearby.
Do not connect or disconnect any test equipment with the ignition on or when the engine is running.
Keep the code reader dry, clean and free from oil, water and grease. Use a mild detergent on a clean cloth
to clean the outside of the code reader when necessary.
3.

General Guidelines

Refer to the Velleman
®
Protect this device from shocks and abuse. Avoid brute force when operating the device.
Familiarise yourself with the functions of the device before actually using it.
All modifications of the device are forbidden for safety reasons. Damage caused by user modifications to
the device is not covered by the warranty.
Only use the device for its intended purpose. All other uses may lead to short circuits, burns, electroshocks,
crash, etc. Using the device in an unauthorized way will void the warranty.
Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the
dealer will not accept responsibility for any ensuing defects or problems.
Nor Velleman nv nor its dealers can be held responsible for any damage (extraordinary, incidental or
indirect) – of any nature (financial, physical...) arising from the possession, use or failure of this product.
Do not switch the device on immediately after it has been exposed to changes in temperature. Protect the
device against damage by leaving it switched off until it has reached room temperature.
Keep this manual for future reference.
V. 01 – 07/02/2017

USER MANUAL

Service and Quality Warranty on the last pages of this manual.
AOBD2
2
©Velleman nv

Publicidad

Tabla de contenido
loading

Tabla de contenido