Reading Codes - Perel AOBD2 Manual Del Usuario

4. Product Features and Vehicle Coverage
 multi-language auto diagnostic tool for OBD-II, EOBD and JOBD
 reads and erases DTCs
 supports CAN (Controller Area Network), VPW, PWM, ISO9141, KWP2000 protocols
 retrieves VIN (Vehicle Identification No.) on 2002 and newer vehicles supported by mode 9
 works with all OBD-II, EOBD, JOBD compliant vehicles with a 16-pin interface
for EU and Asia: all 2000 and newer cars
o
for US: all 1996 and newer cars, light trucks and SUV's
o
all CAN, VPW, PWM, ISO9141, KWP2000 protocols compliant vehicles (including those equipped with
o
the next-generation protocol Control Area Network)
5. Overview
LCD display
1
ENTER button
2
6. Operation
6.1

Reading Codes

Do not connect or disconnect any test equipment with the ignition on or when
1. Turn off the ignition of the car.
2. Locate the 16-pin Data Link Connector (DLC). Plug the code reader into the DLC.
3. Wait for the code to initialize.
V. 01 – 07/02/2017
AOBD2
OBD-II connector
3
SCROLL button
4
WARNING
the engine is running.
3 ©Velleman nv