Amann Girrbach Hand Scanner & IntelliCode Instrucciones De Uso página 11

1. INFORMATION ABOUT THE INSTRUCTIONS
These are brief instructions for integrating the hand scanner into the CAD/CAM System
from Amann Girrbach. The original instructions of the manufacturer Honeywell are also
included with the product.
2. INFORMATION ABOUT THE HAND SCANNER
The hand scanner is used for scanning blank-specific codes (so-called IntelliCodes) and for
transferring the data contained in the code to the CAM software.
2.1 Installation
Fig. 1: Connect the hand scanner
O P E R AT I N G I N S T R U C T I O N S
_ Switch off the PC before connecting the
scanner.
_ Connect the hand scanner to the PC
via the USB port.
_ Restart the PC once the scanner has been
properly connected.
EN
11