Replacing A Fuse - Dolmar TM-92.14 Manual De Instrucciones

34
EN

6.4.4 Replacing a fuse

The machine is fitted with fuses (1)
with different capacities and func-
tions. Specifically:
– 10 A fuse = protects the main
and power circuits of the elec-
tronic circuit board. When it
blows, the machine stops and
the dashboard light switches off.
– 25 A fuse = protects the battery
charger circuit. When it blows,
the battery gradually runs out
and the machine will have prob-
lems starting.
The fuse capacity is indicated on
the fuse.
IMPORTANT
must always be replaced by one
of the same type and ampere rat-
ing, and never with one of anoth-
er rating.
If problems persist, contact Your
Dealer.
A blown fuse
MAINTENANCE
1
1