1
Press the emergency call button on the back of the
telephone and hold it down for 3 seconds. A loud
signal will sound. The seconds are counted down
on the display (delay time). During this time, you
can prevent potential false alarms by pressing
or Cancel.
2
The telephone then dials the first telephone
number in the emergency numbers list within 5
seconds. If the call is not accepted within 1 minute
the next number is dialed. If no one accepts the
call the call loop will end and send the "One-key-
SMS" to all numbers in the list.
3
If anyone from the emergency numbers list
accepts the call, or
SOS procedure will stop and the phone will NOT
send "One-key-SMS".
IMPORTANT
•
Please note that you do not set active answering
machines or voicemail boxes as emergency
numbers.
•
Automatic announcements or a fax (telephone /
fax switch) interrupt the emergency call sequence.
is pressed on the phone, the
35