Restore Factory Settings - Velleman CAMIP5 Manual Del Usuario

Restore Factory Settings

• Selecting 'OK' will clear the memory and reset the device to factory settings. All settings, e.g.
user settings, mail and FTP settings, alarm schedule... are lost.
Reboot Device
• Select 'OK' to reboot the camera.
Note: this will reset the system time. Refer to Date&Time settings.
Log
• The log shows an overview of everyone who accessed the IP camera. It is cleared when rebooting
the system.
Back
• Use this option to return to the For Visitor or For Operator page layout.
9. Additional user information
9.1 Password
• Default, the administrator login is admin without a password. To enhance security, a new
administrator password should be set as soon as possible (see §8.2 under For Administrator
layout – Users Settings).
• If the login or password of the administrator(s) are forgotten or corrupt, the system can be reset
to factory defaults (admin, no password) by pressing and holding the RESET button at the
bottom of the camera for about 5 seconds.
27.10.2010
CAMIP5
17
Rev.01
©Velleman nv