• Follow the instructions on the screen. Click Next to start the software installation.
• Click Next again.
• To finish software installation, the computer must be restarted. Select 'Yes I want to restart my
computer now' and click on Close.
• After reboot, the IP Camera Tool icon appears on the desktop.
Mac
• Locate and open the folder "For MAC".
• Open the folder "IP camera Tool" and copy the tool to your MAC to use it.
8. Software set-up
• Make sure all connections are properly made (see also §6) and double click on the IP Camera
Tool icon to start the software.
8.1
IP Camera Tool
• The software starts searching for cameras over the LAN. 3 Situations can occur:
o No cameras are found on the LAN. If after 1 minute the software does not detect any cameras,
check all cabling of the system and make sure the camera is powered.
27.10.2010
CAMIP5
5
Rev.01
©Velleman nv