D) Using The Dough Blade; E) Using The Blender; Looking After And Cleaning Your Machine; Cleaning The Machine - Brandt ROB506BG Manual De Instrucciones

d) Using the dough blade

Assembly
 Place the bowl (3) on the motor unit (1) making sure that the parts are properly attached.
Turn the bowl clockwise making sure it locks in correctly.
 Insert the disc support (4) and then place the dough blade (12) on the disc support.
Operation
 Plug in the machine.
 Put the food into the feed tube slowly. Push the food down with the pusher (6).
 Turn the switch to "ON".
 Wait until the dough blade stops completely before removing the bowl from the disc.
 Unplug the machine.
e) Using the Blender
Assembly
 Place the blender jar (16) on the motor unit (1) making sure that the parts are properly
attached. Turn the jar clockwise making sure it locks in correctly.
Operation
 Plug in the machine.
 Put the food in the blender jar (16).
 Turn the switch to "ON".

Wait until the blender stops completely before removing the jar.
 Unplug the machine.

4) LOOKING AFTER AND CLEANING YOUR MACHINE

a)

Cleaning the Machine

To avoid any danger:
 Unplug the machine before cleaning it.

Never wash the motor unit in the dishwasher and never immerse it in water or rinse it
under the tap.
 Dismantle the machine proceeding in the reverse order to Chapter
 Clean all the parts of the machine immediately after use to remove the food residues.
 Clean the motor unit with a damp cloth.
 Wash the detachable parts with a mixture of warm water and detergent. They can also be
washed in the dishwasher.
 Do not use a scraper on the metal and plastic parts

Do not fill the bowl with boiling water or place any of the parts in boiling water.
21