Appendix B –
Hand/Wrist (Metacarpals
and Phalanges) Use
OL1000 SC1 Application Instructions
1 . Remove Velcro tab "A" and loosen
strap . (Figure 1)
2 . If unit is to be applied over a cast,
remove liner pad . Otherwise, leave
liner pad installed . (Figure 2)
Option 1
3 . Place hand through strap opening .
(Figure 3)
4 . Center treatment coil directly over
fracture site as prescribed by your
physician and secure strap . (Figure 4)
5 . Place hand/wrist on a stable surface
with the palm facing down (Figure 3)
6 . To tighten or loosen the strap, remove
and reposition Velcro tab "A" . Adjust
strap until it feels comfortable and
secure . (Figure 1)
Option 2
7 . Place the coil on a stable surface with
the softgood facing up . (Figure 5)
8 . Center the treatment site on top of
the softgood pad and secure the
strap . (Figure 4)
9 . To tighten or loosen the strap, remove
and reposition Velcro tab "A" . Adjust
strap until it feels comfortable and
secure . (Figure 1)
EN
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
15