JVCKENWOOD KD-R775S Manual De Instrucciones página 15

AUDIO SETTINGS
EQ SETTING
EQ PRESET Select a preset equalizer suitable to the music genre. (Select [USER] to use the
settings made in [EASY EQ].)
FLAT ( Default) / HARD ROCK / HIP HOP / JAZZ / POP / R&B / TALK / USER /
VOCAL BOOST / BASS BOOST / CLASSICAL / DANCE
EASY EQ Adjust your own sound settings. The settings are stored to [USER].
SUB.W SP * *
1 2
: 00 to +06
SUB.W * *
1 3
: –08 to +08
BASS LVL: –06 to +06
MID LVL: –06 to +06
TRE LVL: –06 to +06
1 BASS / MIDDLE / TREBLE: Select a sound tone.
PRO EQ
2 Adjust the sound elements of the selected sound tone.
BASS Frequency: 60/ 80/ 100/ 200 HZ
Level:
Q:
MIDDLE Frequency: 0.5/ 1.0/ 1.5/ 2.5 KHZ
Level:
Q:
TREBLE Frequency: 10.0/ 12.5/ 15.0/ 17.5 KHZ (Default: 10.0 KHZ
Level:
Q:
* 1
Displayed only when [SUB.W] is set to [ON].
* 2
Displayed only when [SPK/PRE OUT] is set to [SUB.W/SUB.W]. ( 16)
* 3
Displayed only when [SPK/PRE OUT] is set to [REAR/SUB.W] or [SUB.W/SUB.W]. ( 16)
Default: XX
(Default: 03
00
00
00
00)
( Default: 80 HZ
–06 to +06
Q1.0/ Q1.25/ Q1.5/ Q2.0
(Default: 1.0 KHZ
–06 to +06
Q0.75/ Q1.0/ Q1.25
–06 to +06
Q FIX
AUDIO
BASS BOOST +01 — +05 (+01): Selects your preferred bass boost level. ;
OFF: Cancels.
LOUD 01 / 02: Boosts low or high frequencies to produce a well-balanced
sound at low volume. ; OFF: Cancels.
For KD-R775S
SUB.W LEVEL –08 to +08 (00): Adjusts the output level of the subwoofer
connected to the lineout terminals (SW) through an external
amplifier. ( 25)
For KD-R670 / KD-R570 / KD-R470 / KD-R370
SUB.W LEVEL * 1 SPK-OUT *
PRE-OUT *
00
Q1.0)
SUB.W * 3
ON / OFF: Turns on or off the subwoofer output.
00
SUB.W LPF * 1
THROUGH: All signals are sent to the subwoofer. ; LOW 55HZ /
Q1.25)
MID 85HZ / HIGH 120HZ: Audio signals with frequencies lower than
55 Hz/ 85 Hz/ 120 Hz are sent to the subwoofer.
00
Q FIX) SUB.W PHASE * 1
REVERSE (180°)/ NORMAL (0°): Selects the phase of the subwoofer
output to be in line with the speaker output for optimum performance.
(Selectable only if a setting other than [THROUGH] is selected for
[SUB.W LPF].)
2
00 to +06 (+03): Adjusts the output level of the
subwoofer connected via speaker lead. ( 25)
3
–08 to +08 (00): Adjusts the output level of the
subwoofer connected to the lineout terminals (REAR/
SW) through an external amplifier. ( 25)
ENGLISH
15