Cleaning And Maintenance - HQ-Power HQPL10001 Manual Del Usuario

5. Overview
Refer to the illustrations on page 2 of this manual.
1 flash speed button
2 on-off switch
6. Batteries

Insert 4 new 1.5 V AA batteries in the battery compartment in
accordance with the polarity markings inside the battery compartment.
Warning: Do not puncture batteries or throw them in fire as
they may explode. Do not attempt to recharge non-
rechargeable batteries (alkaline). Dispose of batteries in
accordance with local regulations. Keep batteries away from
children.
7. Operation
Switch the strobe on or off using the switch at the rear of the device.
Set the flash speed via the speed control knob on the back.

8. Cleaning and Maintenance


All screws should be tightened and free of corrosion.

The housing, visible parts, mounting supports and the installation
location (e.g. ceiling, suspension, trussing) should not be deformed,
modified or tampered with e.g. do not drill extra holes in mounting
supports, do not change the location of the connections.

Moving mechanic parts must not show any signs of wear and tear.

The electric power supply cables must not show any damage. Have a
qualified technician maintain the device.

Disconnect the device from the mains prior to maintenance activities.

Wipe the device regularly with a moist, lint-free cloth. Do not use
alcohol or solvents.

There are no user-serviceable parts.

Contact your dealer for spare parts if necessary.
V. 01 – 02/12/2015
HQPL10001
3
5
battery compartment
©Velleman nv