Intended Use; Important; Operation; Safety - Beurer HK 35 Instrucciones Para El Uso

• If you should have any questions about using our devices, please
contact Customer Services.

3. Intended use

IMPORTANT

This heating pad is only designed to warm up the human body. To avoid damage to the film cover and/
or the insulation of the cables, do not use the heating pad in conjunction with essential oils or lotions.
NOTE HK 63
The heating pad is fitted with 6 integrated permanent magnets that produce a homogenous magnetic
field for magnetic field applications.

4. Operation

4.1 Safety

CAUTION
The heating pad is fitted with a SAFETY SYSTEM. This sensor technology provides protection against
overheating across the entire surface of the heating pad with an automatic switch-off in the event of a
fault. If the SAFETY SYSTEM has switched off the heating pad, the temperature settings are no longer
illuminated when switched on. Please note that for safety reasons, the heating pad can no longer be
operated after a fault has occurred and must be sent to the specified service address.
Do not connect the defective heat pad with another controller of the same type. This would trigger a
permanent switch-off via the controller safety system.

4.2 Initial use

IMPORTANT
Ensure that the heating pad will not bunch up or become folded during use.
• First, connect the controller to the heating pad by inserting the plug-in coupling.
• Then plug the mains plug into the socket.

4.3 Switching on

To switch the heating pad on, set the sliding switch for ON/OFF and temperature settings to setting 1, 2 or 3.
The temperature settings (4) are illuminated when switched on.

4.4 Setting the temperature

Level 0: OFF
Level 1: minimum heat
Level 2: medium heat
Level 3: maximum heat
NOTE
• The fastest way to warm up the heating pad is to initially set the highest temperature setting.
NOTE HK 35, HK 63
These heating pads have a fast heating function, which allows the pad to warm up faster
in the first 10 minutes.
12