Starrett S8010 Manual De Instruccion página 107

4. It is recommended USE protective gloves and safety
glasses when operating the machine, they can prevent
burns and hand injuries, and improve the handle of
it.KEEP away the other hand (which is free) from the
part being drilled in order to avoid the risk of accidents;
5. KEEP hands away from the motor housing ventilation output. Hot air
emanates from the openings during operation;
6. DO NOT USE the machine at full load for more than 30 seconds, the en-
gine can get too hot and damage;
7. RELEASE the trigger switch immediately when the screws are tightened
to avoid breaking the screw and hand twist the sudden stop of the chuck.
PAY ATTENTION during this type of operation;
8. To get better results, the Battery should be charged in a local where tem-
perature is between 5
unprotected areas or in vehicles.
DATA OF THE NOISE AND VIBRATION:
The values obtained in noise and vibration measurement process is in ac-
cordance with IEC 60745
NOISE: The following information addition the noise and vibration items
below. The noise levels of the scale A is typically:
- sound pressure level:
- sound power level:
- Measurement uncertain:
VIBRATION: The vibration arm and hand is typically less than 2.5 m/s
o
C (41°F) to 55
LpA = 77.3 dB(A);
LwA = 88.3 dB(A);
K= 3 dB(A).
o
C (131°F). DO NOT STORE in external
ENGLISH
WEAR EAR PROTECTOR
2
S8010 107
.