Broan BPDC1 Serie Manual De Instalación,Utilización Y Cuidado página 17

7 ] For framed cabinet, secure the hood to the EZ1 brackets using a 10" drill bit and 4 no. 8-18 x
1/2" metal screws with washers (screws and washers included in parts bag). Insert 2 screws
and washers per side, in the slots (as shown in inset on illustration below).
8 ] For frameless cabinet, secure the hood to the cabinet using 4 no. 8 x 5/8" round head wood
screws (screws and washers included in parts bag). Insert 2 screws and washers per side, in
the slots (as shown in inset on illustration below).
M
S
9 ] Attach power cable to the hood using the strain relief.
FRAMED
CABINET
ETAL
CREWS
FRAMELESS
CABINET
W
OOD
S
CREWS
17