Mondolfo Ferro MT 3800 LASER Manual De Uso página 71

• The Fast wheel icon, if the programme for
fast vehicle wheels has been selected.
• The Slow wheel icon, if the programme for
slow vehicle wheels has been selected.
Note: each time the machine is switched on, if
the Easy Weight suite has been activated, the
Fast wheel programme is automatically set.
At this point it is possible to perform the
wheel balancing, using the required balancing
programme.
At the end of the spin, if the wheel balancing is
not satisfactory, a screen will display the values
of the weights to be applied to the inner and
outer sides of the rim.
If, on the other hand, the wheel balancing is
satisfactory, the icons
place of the weight values. Within the unbalance
indicators, there are two semicircular bars
showing the residual torque unbalance level
(left-hand indicator) and the residual static
unbalance level (right-hand indicator).
To visualise the statistics relating to the use of
the Easy Weight, it is necessary to select the
icon Statistics.
The displayed screen shows:
• The counter of all spins performed during
MT 3800 LASER - Operator's manual
the entire working life of the machine
• The counter of the weight quantity (spring and
adhesive) saved during the entire working life
of the machine
• The counter of the spins performed since the
last machine reset
• The counter of the weight quantity saved since
the last machine reset
• A histogram showing a comparison between
the spring weight quantity required if the
Minimum Weight programme is not used (red
rectangle), and the quantity required if the
Minimum Weight programme is used (green
rectangle), in relation to the entire working
life of the machine.
• A histogram showing a comparison between
the adhesive weight quantity required if the
Minimum Weight programme is not used (red
rectangle), and the quantity required if the
Minimum Weight programme is used (green
rectangle), in relation to the entire working
are displayed in
life of the machine.
Note: the values shown by the counters are
updated with each spin in relation to the
Minimum Weight programme selected.
The Reset icon allows you to zero-set the
partial counters.
.
.
.
.
UK
71