Leckey Mygo+ Manual De Usuario página 12

p12 Leckey Mygo+ User Manual
SECTION 7.4:
ATTACHING THE PUSH HANDLE
The push handle is attached to the
Hi-low chassis by inserting the two lower
stems into the receiving tubes as shown.
The push handle has safety poppers
which need to be pressed in when
inserting the lower stems. Push the stems
in until the poppers protrude from the
other end of the receiving tubes. Secure
the handle in place by tightening the
locking bolts . Ensure height adjustment
B
knobs are tight prior to use
,
A
.
C
C
Check these regularly to
make sure the knobs are
tight, particularly if you are
moving the product unit
along corridors that may
have uneven or sloping
surfaces.
B
A