Leckey Mygo+ Manual De Usuario página 21

SECTION 7.18:
INTERFACES FOR WHEELCHAIR
AND PUSHCHAIR BASES
Interface "A" attachment to 16" wide
mobility base
The universal interface has been designed
to enable the Mygo+ Seat to be attached
to any standard 16" (405mm) wide
mobility base that has been constructed
from 1" (25.4mm) side tubing.
Please refer to specific assembly
instructions supplied with your interface
for correct positioning on your base.
The Interface plate should be fitted by
a qualified technician who is technically
competent in the set up of the mobility
base. The position of push handles, leg
hangers and armrests on the mobility
base may need to be adjusted depending
on the size and weight of the child to
ensure the stability of the seat.
Leckey Mygo+ User Manual p21
The set up and attachment
of the Mygo+ seat to any
mobility base should be
completed by a technically
competent person who is
familiar with the set up
of the mobility base.
Always refer to the mobility
base manufacturer's guide
lines for correct set up,
paying particular attention
to product centre of gravity
and stability.
Users should not be
left unattended at
any time whilst using
Leckey equipment.