Content And Structure Of This Document; Intended Use - BYD Battery-Box Premium LVL 15.4 Guia De Inicio Rapido

2. Safety BYD Europe B.V.
• Training in the installation and commissioning of electrical equipment
• Knowledge of, and adherence to the locally applicable connection requirements, standards, and
directives
• Knowledge of, and adherence to this document and the associated system documentation,
including all safety instructions

1.3. Content and Structure of this Document

This document contains safety information and instructions on installing, connecting, and
commissioning. Please finish reading this document before taking any actions on the system.
The latest version of this document and the manual for installation, commissioning, and operation
are to be found in PDF format on our websites.
This document only contains brief information and may deviate from the real system.
2. Safety

2.1. Intended Use

The system is for residential and small business use and works with a photovoltaic system. It is a
48V Li-ion battery storage system, with a control module on itself. It could be operated in either
off-grid or on-grid mode with compatible inverters.
The system could be connected with the Internet through network cable for maintenance and
software updates.
The system must only be used as stationary equipment.
The system is suitable for indoor use only.
The system must only be operated in connection with a compatible inverter. The list (BYD
Battery-Box Premium LVL Minimum Configuration List) of these inverters could be read on our
websites.
The system is not suitable for supplying life-sustaining medical devices. Please ensure that no
personal injury would lead due to the power outage of the system.
Alterations to the BYD system, e.g., changes or modifications are not allowed unless the written
permission of BYD is achieved.
The enclosed document is an integral part of this system. Keep the documentation in a convenient,
dry place for future reference and observe all instructions contained therein.
The type label should always be attached to the system.
2.2. IMPORTANT SAFETY INSTRUCTIONS
The system has been designed and tested in accordance with international safety requirements.
However, in order to prevent personal injury and property damage and ensure long-term operation of
the system, please do read this section carefully and observe all safety information at all times.
2.2.1. Battery module leakage
If a battery module leaks electrolytes, contact with the leaking liquid or gas should be avoided. The
electrolyte is corrosive, and the contact may cause skin irritation and chemical burns. If one is
exposed to the leaked substance, do these actions:
4 Quick Start Guide