Beta 1760 Manual De Uso página 29

Switching C/F, LOCK ON/OFF and SET ALARM
1 C°/F°.
Select the temperature units (°C or °F) using the °C/°F switch
2 Lock ON/OFF
To lock the unit on for continuous measurement, slide the middle
switch LOCK ON/OFF right. If the trigger is pulled while the
unit is lock on, the laser and backlight will turn on if they have
been activated. When the unit is locked on, the backlight and laser
will remain on unless it is turned off using the Laser/Backlight
button on the keypad.
3 Set Alarm
To.activate.the.alarms,.slide.the.bottom.switch.SET.ALARM.
right.
To set values for the High Alarm (HAL), Low Alarm (LAL).
and Emissivity (EMS), first activate the display by pulling the
trigger. or. pressing. the. MODE. button,. then. press. the. MODE.
button.until.the.appropriate.code.appears.in.the.lower.left.cor-
ner of the display, press the UP and down buttons to adjust the
desired.values.

1
2
3