Technical Data - VWR VOS 60 control Instrucciones De Manejo

Technical data

VOS 60 control station + Wireless Controller (WiCo)
Speed range under nominal load
Speed adjustment
Speed display
Speed setting accuracy
Deviation – speed measurement
Max. torque at stirrer shaft
Torque trend measurement
Torque trend display
Deviation – torque measurement
Max. stirring quantity (water)
Max. viscosity
Intermittent operation
Reversible direction of rotation
Port for ext. temperature sensor
Temperature display
Timer function
Permitted on time
Nominal voltage
Frequency
Max. input power
Max. output power at stirring shaft
Protection class according to DIN EN 60529
Protection class
Excess voltage category
Contamination level
Protection at overload
Fuse (on mains plate)
Ambient temperature
Ambient humidity (rel.)
Drive
Clamping chuck – clamping range
Hollow shaft internal diameter
Extension arm (Ø x L)
Housing
Dimensions (W x D x H), without extension arm,
with Wireless Controller
Weight (with extension arm and clamping chuck)
Operation at a terrestrial altitude
USB interface
RS 232 interface
Temperature measurement resolution
Measurement range, temperature
Limiting deviation, temperature sensor
PT 1000 DIN EN 60751 class A
Measurement accuracy, temperature
max. communication range (dependent on the building)
Dimension (B x T x H) – Wireless Controller
Weight – Wireless Controller
USB interface – Wireless Controller
RB 1 Battery pack
Voltage
Battery capacity
Charging time
Working time
Battery type
Subject to technical changes!
rpm 0 / 30 – 2000
Stepless
TFT / Wireless Controller
rpm ± 1
Speed < 300 rpm: ± 3 rpm ... Speed > 300 rpm: ± 1%
Ncm 60
yes
yes
Ncm ± 6
ltr 40
mPas 50000
yes
no
yes
yes
yes
% 100
VAC 230 ± 10% (EURO), 115 ± 10% (USA)
Hz 50 / 60
W 176
W 126
IP 40
I
II
2
yes / motor current limitation
A T 4 A
°C + 5 to + 40
% 80
Brushless motor
mm 0,5 – 10
mm 11
mm 16 x 220
Coated aluminium casting and thermoplastic plastic
mm 86 x 230 x 267
kg 4,7
m max. 2000
yes
yes
K 0,1
°C - 10 to + 350
K ≤ ± (0,15 + 0,002 x ITI)
K ± 0,5 + tolerance PT 1000 (DIN EN 60751 class A)
m 40 – 150
mm 71 x 74 x 151
kg 0,28
yes
V 3,7
mAh 2000
h 4,5
h 15
Lithium-polymer
12