Fox F36-255 Manual De Instrucciones página 30

19. Keep the tools in perfect conditions. Keep the tools sharp and clean to obtain better and safer
results. Follow the instructions to grease and change the accessories. Check regularly the
electric cable and change it if it is damaged. Keep the handles and the handgrips dry, clean,
unoiled and ungreased.
20. Disconnect the tool from electricity if you do not use it, before maintenance and change of
the accessories or tools such as blades, drills, mills, etc.
21. Remove locking and adjustment wrenches from the workbench. Get used to check if the
locking and adjustment wrenches have been removed before starting it.
22. Check the parts of the tool to verify that there are not any damages. Before using the
machine, check if the safety devices or any other parts are damaged in order to be sure that
it works properly and that it can accomplish the tasks for which it has been designed. Check
that the moving parts are aligned, do not stop and are not broken. Check the assembly and
any other condition that can influence the functioning of the machine. Any part or protection
damaged must be repaired or changed from an authorised after sales centre. Do not use the
machine if the switch does not work properly.
23. Use the machine, the tools and accessories in the way and for the purposes mentioned i this
manual. Different uses and parts can cause possible risks for the operator.
24. Get the machine repaired by a qualified person. This electric tool is in compliance with local
safety regulations. The machine must be repaired only by qualified people who use original
spareparts, otherwise risks may arise for the operator.
EN
28