Bosch TASSIMO TAS 20 Serie Instrucciones De Uso página 14

Ocultar thumbs Ver también para TASSIMO TAS 20 Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

en
17 oz. /
500 ml
approx. 20 min.
5 sec.
TAS20_UC.indb 13
running the descaling program
Remove the water tank from your
TASSIMO machine and take the Service
T DISC out (11). Insert it in the brewing
unit with the barcode face down, and
close the clamp down fi rmly.
Prepare descaling solution (not vinegar-
based) according to the manufacturer's
instructions. If you cannot fi nd an
appropriate descaling agent at various
retailers, it is available through TASSIMO
or Bosch Customer Service Department.
Replace the water tank containing the
descaling solution back on the machine.
Remove the cup stand and place a
suitable container (min. 17 oz. / 500 ml
hot
capacity) under the drink outlet.
Press and hold the start  / stop button
for at least 5 seconds to start the
descaling program.
The program now proceeds automati cally
Q
and
fl ash. (Duration approx. 20 minutes). The
descaling solution is pumped through
the appliance at intervals and then runs
into the container until the water tank is
almost empty. A little liquid is always left
in the tank.
Stand-by icon will light up after approx.
20 minutes of running descaling program.
Empty the container and replace it under
the drink outlet.
Rinse the water tank thoroughly and fi ll
up to the "max" mark with fresh water.
Replace it back onto your TASSIMO
machine.
O
Descale and
Automatic lights
13
01/2013
28.03.2013 11:03:16

Publicidad

Tabla de contenido
loading

Tabla de contenido