Degrees C/F Menu; Temp Calibration Menu - Zodiac AquaLink PDA Manual De Uso

6.5 Degrees C/F Menu

The Degrees C/F menu allows you to change the AquaLink PDA temperature display from Fahrenheit to Celsius or
vice versa. When changing from Fahrenheit to Celsius you will have to re-enter the temperature settings.
6.5.1 To change the Temp readout
Highlight MENU and press SELECT, highlight SYSTEM SETUP and press SELECT, highlight DEGREES C/F and
press SELECT. Use the UP/DOWN arrow keys to highlight desired setting and press SELECT.
MAIN MENU
HELP
PROGRAM
SET TEMP
SET TIME
PDA OPTIONS
SYSTEM SETUP

6.6 Temp Calibration Menu

This menu allows adjustment of the temperature that is displayed on the AquaLink PDA. The temperature can only be
adjusted up four (4) degrees Fahrenheit or down four (4) degrees Fahrenheit, see note below.
6.6.1 To adjust Temperature display
Highlight MENU and press SELECT, highlight SYSTEM SETUP and press SELECT, highlight TEMP CALIBRATE
and press SELECT. Use the UP/DOWN arrow keys to set values and press SELECT when finished.
NOTE
If the temperature is off by more than four (4) degrees, contact your local service representative.
MAIN MENU
HELP
PROGRAM
SET TEMP
SET TIME
PDA OPTIONS
SYSTEM SETUP
AquaLink PDA | Installation and Operation Manual
®
SYSTEM SETUP
LABEL AUX
FREEZE PROTECT
AIR TEMP
DEGREES C/F
TEMP CALIBRATE
SOLAR PRIORITY
PUMP LOCKOUT
ASSIGN JVAs
MORE
SYSTEM SETUP
LABEL AUX
FREEZE PROTECT
AIR TEMP
DEGREES C/F
TEMP CALIBRATE
SOLAR PRIORITY
PUMP LOCKOUT
ASSIGN JVAs
MORE
Page 27
ENGLISH
DEGREES C/F
FAHRENHEIT
CELSIUS
Choose setting
and press SELECT.