Heat Pump Menu; Variable Speed Pump Menu - Zodiac AquaLink PDA Manual De Uso

Page 32
ENGLISH

6.14 Heat Pump Menu

NOTE
This equipment may not be part of your system. Please check with your installer.
The HEAT PUMP SETUP menu is used to put the heat pump into the heat or chill mode. If the heat mode is selected,
then HEAT PUMP will be displayed on the EQUIPMENT ON/OFF menu. If chill mode is selected then CHILLER
will be displayed on the EQUIPMENT ON/OFF menu.
NOTE
In addition to setting heat or chill mode from the Heat Pump Setup menu, the switch on the heat pump must be manually
set to heat or chill.
6.14.1 To set the Heat Pump
Highlight MENU and press SELECT, highlight SYSTEM SETUP and press SELECT, highlight HEAT PUMP and
press SELECT. Use the UP/DOWN arrow keys to highlight either HEAT or CHILL, then press SELECT. A message
will be displayed informing the user that they must walk out to the heat pump and set it to heat or chill mode as well.
MAIN MENU
HELP
PROGRAM
SET TEMP
SET TIME
PDA OPTIONS
SYSTEM SETUP

6.15 Variable Speed Pump Menu

NOTE
This equipment may not be part of your system. Please check with your installer.
The VAR SPEED PUMP menu is used to select the variable speed pump type and to select the various pump settings.
The user has the option to control one of four types of variable speed pumps, Jandy
ePump AC, IntelliFlo
TM ®
6.15.1 To select the Pump Type
Highlight MENU and press SELECT, highlight SYSTEM SETUP and press SELECT, highlight VAR SPEED PUMP
and press SELECT, highlight PUMP MODEL and press SELECT. Use the UP/DOWN arrow keys to highlight the
desired model, then press SELECT. An X will appear next to the selection.
MAIN MENU
HELP
PROGRAM
SET TEMP
SET TIME
PDA OPTIONS
SYSTEM SETUP
AquaLink
®
SYSTEM SETUP
SOLAR PRIORITY
PUMP LOCKOUT
ASSIGN JVAs
COLOR LIGHTS
SPA SWITCH
SERVICE INFO
CLEAR MEMORY
HEAT PUMP
MORE
VF, or IntelliFlo VS.
SYSTEM SETUP
VAR SPEED PUMP
LABEL AUX
FREEZE PROTECT
AIR TEMP
DEGREES C/F
TEMP CALIBRATE
SOLAR PRIORITY
PUMP LOCKOUT
MORE
PDA | Installation and Operation Manual
HEAT PUMP
SETUP
HEAT MODE
CHILL MODE
Choose setting
and press SELECT
VSP SETTINGS
PUMP MODEL
PUMP APPLICATION
MIN-MAX SETTINGS
SPEED/LABELS
PRIME
Highlight an item
and press SELECT
HEAT PUMP
SETUP
HEAT/COOL MODE
MUST BE SET AT
HEAT/COOL MODE
HEAT PUMP
CONTINUE
Pro Series ePump DC, Jandy
®
PUMP MODEL
JANDY ePUMP DC
INTELLIFLO VF
INTELLIFLO VS
Highlight an item and
press SELECT
HEAT PUMP
SETUP
DID YOU SELECT
THE PROPER
AT THE
HEAT PUMP?
YES
NO
X