Maintenance & Care; Important - Bissell PROHEAT 2X PREMIER 47A2 SERIE Guia Del Usuario

Maintenance & Care
Drive belt removal & replacement
Occasional replacement of one or both belts
may become necessary. if that is needed, please
follow the instructions below.
1. Turn off the machine, and unplug it from
the outlet.
2. Remove the 2-in-1 water tank. set aside.
3. Remove the nozzle and end caps by
following the instructions in step 5 on
page 13.
4. Turn the machine on its side.
IMPORTANT: cord side up.
5. Remove 1 silver screw from the pivot arm.
6. Remove pivot arm by gently lifting up.
7. Remove the drive belt and replace it by
first attaching it to the small drive wheel, then
attach it to the end of the inside brush.
fluid connection point filter maintenance
Periodic cleaning of the fluid connection
point in the spray nozzle may be required.
1. To clean the fluid connection point,
remove the nozzle and turn it over.
2. Clean the filter on the end of the fluid
connection point with a small paperclip
and re-attach the nozzle to the machine.
www.bissell.com
14
1.
800.237.7691
3.
5.
4.
7.
2.