Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
English
•
Release the hose connector
port
6
as shown in Figure L.
Fig. Q
12
•
Place the dust canister over a trash bin and press
the dust canister lid release button
canister as shown in Figure Q.
•
Push the compaction handle
contents of the dust canister
nOTE: The dust compaction handle
compact the contents of the dust canister
capacity of the dust canister.
•
Close the dust canister lid
into position.
Compacting the contents of the dust
canister (Fig. R)
With the dust canister lid
12
handle
22
down to compact the contents of the dust
canister
9
thus increasing its capacity as shown in Figure R.
Fig. R
Releasing the dust canister (Fig. R–T)
nOTE: The dust canister can be released either from the
unit while it is in chassis mode, as shown in Figure S, or
when being used in the lift away canister vac mode, as
shown in Figure T.
•
Press the dust canister release lever
the dust bowl.
•
Free the dust canister
9
vac
.
5
8
3
from the main body hose
27
27
to empty the
22
down to empty the
as shown in Figure R.
9
can also be used to
22
9
, doubling the
12
, until it "clicks" firmly
closed, push the compacting
22
9
12
10
down to release
from the lift away canister
nOTE: The catch
34
ensures that the unit will be unable to
start when the dust canister
away canister vac
5
or when the compaction handle
in operation.
•
Using the dust canister handle
unit over a suitable waste receptacle, press the dust
canister release button
27
lid
12
and push the compacting handle
empty the contents of the dust canister
Figure R.
Fig. S
10
5
Fig. T
10
9
5
Cleaning the filters (Fig. S–X)
•
Press the dust canister release lever
the dust canister as shown in Figure S.
•
While holding the compaction handle
assembly
28
from the dust canister
counter-clockwise as shown in Figure U.
nOTE: A scented disc will be provided in foil packaging. This
is to be opened and the disc is to be placed in the bottom
of the pre-filter allowing for a pleasing odor to be released
when the appliance is in use.
•
The filter
29
can now be removed from the pre filter
shown in Figure V.
•
The dust canister can be seperated into two parts,
and
, for a more thorough cleaning as shown in
40
Figure W.
•
Shake or lightly brush any loose dust off filter.
9
is not connected to the lift
22
and holding the
35
to release the dust canister
22
down to
9
as shown in
34
35
9
35
10
down to release
22
, lift the filter
9
by rotating
30
9
is
as
Publicidad
Tabla de contenido
