Temperature Measurement - Minipa MT-1400 Manual De Instrucciones

between the testing leads and the circuit under test..
F. Temperature Measurement
Warning
To avoid harms to you or damages
to the Meter, please do not attempt
to input voltages higher than 60V
in DC or 30V in AC RMS.
The temperature measurement range
is: -40°C to 1000°C. To measure
temperature, connect the Meter as
follows:
1. Insert the red temperature probe
into the VΩmA°C°F terminal and
the black temperature probe into
the COM temperature.
2. Set the rotary switch to °C or °F.
3. Place the temperature probe to the object being measured. The measured
value shows on the display.
Note
• The Meter automatically displays the temperature value inside the Meter
when there is no temperature probe connection.
• The included point contact temperature probe can only be used up to
250°C(482°F). For any measurement higher than that, the others rod
type temperature probes must be used instead.
• When temperature measurement has been completed, disconnect the
connection between the testing leads and the circuit under test.
12
Figure 10