Safety Rules Of Connecting External Power Tool - Skil ME981901 Manual Del Propietário

Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from
•
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
•
DANGER
before using this product. Operation of electrical equipment in close
proximity to a heart pacemaker could cause interference or failure of
the pacemaker.
SAFETY RULES OF CONNECTING EXTERNAL
POWER TOOL
WARNING
such as AC supply and DC mobile power . Failure to follow all
instructions below may result in electric shock, explosion, fire and/or
serious personal injury.
Only choose the qualified and legal adapter which output voltage is
5V and output electricity is ≥0.5A.
Confirm the adapter suits the AC supply before do connecting.
Confirm the mobile power is qualified and legal , the output voltage
is 5V and the output electricity is ≥0.5A before do connecting.
Keep the adapter clean. Check the adapter, cable and plug before
do connecting. If damage is detected, do not use or repair by
yourself, change the damaged one or get repairs performed by
authorized service personnel, otherwise electric shock may occur.
Do not do connecting with AC supply on easily inflammable surfaces
(e.g., paper, textiles, etc.) or surroundings. The heating of the
adapter during using may pose a fire hazard.
Children or persons with physical, sensory or mental limitations
or lack of experience and knowledge are not capable of securely
operating the adapter unless they are being given supervision or
having been instructed by a responsible person.
People with electronic devices, such as
pacemakers, should consult their physician(s)
Read and follow all instructions below
before connect with external power supply
5