Charging The Internal Battery Back-Up - Snooper DVR-1HD Mini Manual Del Usuario

Charging the internal battery back-up

Your DVR1HD includes a small built-in rechargeable battery back-up. This
is required if you want to change the factory default settings and need to
connect the device to a separate monitor or Snooper portable navigation
device.
There are two ways to charge the internal battery.
1. Connect your DVR-1HD to your PC using the USB cable provided.
2. Charge using the USB car charger provided.
When charging, a red LED indicator light will illuminate. Once the internal
battery is fully charged the red LED indicator light will automatically
switch off.
Please note that the internal battery has not been designed to run your
DVR-1HD. Your DVR-1HD must be powered by a permanent 5V or 12V
feed to operate correctly.
UK • 10